Roofing Dumpster Rental

Tear-offs sized by the square rather than by volume, because a square of composition shingle weighs close to 250 pounds. The container is placed near the drop zone so the crew is not carrying bundles across a lawn.

Roofing dumpster rental for a shingle tear-off in Concord, CA

Roofing is a weight job, always

This is the one service where cubic yards are the wrong unit entirely.

Roll-off container loaded with roofing tear-off debris

A square is 100 square feet of roof. One square of composition shingle weighs roughly 250 pounds, and a second layer doubles it. That means a 25 square roof produces about 3 tons of debris in a volume that barely fills a 20 yard container.

So the container is chosen by tonnage, not by how full it looks. We size from the roof measurement and the number of layers, and we say in advance whether the load is likely to run past the allowance. That is far cheaper than finding out from the scale ticket.

  • Composition and architectural shingle tear-offs
  • Second and third layer removal
  • Underlayment, felt and ice barrier
  • Flashing, drip edge and vents
  • Wood shake and shingle removal
  • Flat roof material and torch-down
  • Rotten sheathing replaced during the tear-off
  • Gutter and fascia debris

Pick a size by the squares

Tap a container to see the weight allowance, then match it to your roof area and layers.

20 yard roll-off dumpster from BBP Dumpster

Selected size

20 yard roll-off

Rental is for up to 7 days. Price per ton over is $165.00/ton.

Book this size

See full details for this size

Weight allowance and dimensions for each container, to match against your square count: 10 yard, 15 yard, 20 yard, 30 yard, 40 yard, Dirt or concrete.

The arithmetic: 25 squares of single layer composition is about 3.1 tons, which fits a 30 yard allowance and exceeds a 20 yard by more than a ton. Two layers on the same roof doubles it. Tell us the square count and the layers and the size follows from the number, not from a guess.

What goes in, and what never does

Roofing material is accepted in any container. The refusals matter more here because tear-off debris is loaded fast and mistakes get buried.

Accepted in a roofing container

  • Composition and architectural shingle
  • Wood shake and shingle
  • Underlayment, felt and synthetic membrane
  • Flashing, drip edge and metal trim
  • Rotten plywood and sheathing
  • Torch-down and flat roof material
  • Gutters, downspouts and fascia board

Refused, no exceptions

  • Tar, adhesive and sealant containers
  • Solvent, primer and roofing cement tins
  • Propane tanks from torch equipment
  • Asbestos, common in older flat roofs
  • Batteries and power tool packs
  • Tires and equipment waste
  • Wet dirt or debris from other trades

How it works

Four steps, with placement decided by where the crew is dropping from.

1

Give us the squares

Roof area and the number of layers. Those two numbers pick the container by themselves.

2

We place it at the drop zone

Weekday calls before 2PM usually land the same afternoon, set close to the work.

3

The crew tears off

Seven days standard. Load level with the rail so the container can be tarped for the road.

4

We haul it

One call and it is gone, with the scale ticket on the invoice so the tonnage can be checked.

What roofers say

Left by roofing crews and homeowners after tear-offs, copied from Google.

Rating summary

5
4
3
2
1
4.9
54 reviews
Review
Mina
★★★★★ 7 months ago

Super easy process! Ordered a dumpster for home cleanout, and it was delivered same morning. Great price too!!

Marlon M.
★★★★★ 2 years ago

I call from google to this company Bbp dumpster looking for same day delivery and they was very friendly and did delivery the dumpster at same day very recommended

Cyntia F.
★★★★★ 2 years ago

I used Bbp Dumpster’s services and I am really satisfied, their service is excellent and the prices were within my budget. They are clean and organized, I didn’t have any problems with their services. honest and good quality company. Thank you very much Bbp Dumpster

Justin
★★★★★ 9 months ago

The delivery was very fast exceptional really and the communication was the best you could ask for the truck was great overall everything went smooth really good experience.

Tiny L.
★★★★★ a year ago

BBP dump is amazing they came to help do a move out clean. Very affordable and fast service same day service which was extremely helpful 10/10

lyra B.
★★★★★ 8 months ago

Needed a dumpster for remodeling, and they handled everything smoothly. Very professional and fast pickup

Tiago F.
★★★★★ 2 years ago

“Last week with Bbp Dumpster was a breeze , their efficiency and quality service truly made our project run seamlessly. Grateful for their top-notch assistance!”

Tamaira W.
★★★★★ 2 years ago

They arrived on time and provided excellent customer service. Highly recommend this company. The same-day delivery and great price!

Where we drop roofing containers

Placed beside tear-offs across both counties, dispatched from the yard on Clayton Rd. Tap a city to find it on the map.

Contra Costa County

28 cities and communities

Alameda County

17 cities and communities

Roofing containers are dropped daily in Concord, Walnut Creek, Martinez, Pleasant Hill, Clayton, Danville, San Ramon, Antioch, Pittsburg, Richmond in Contra Costa County, and Oakland, Berkeley, Hayward, Fremont, Pleasanton, Livermore, Castro Valley, San Leandro in Alameda County. Not on the map? Call (925) 940-9906. Tear-offs outside the daily map are booked on planned dates, which suits a job scheduled in advance.

Roofing dumpster FAQs

Squares, layers, weight and placement, answered with the arithmetic.

What size dumpster for a roof tear-off?

Count squares, not cubic yards. Up to 15 squares fits a 15 yard, 15 to 25 squares takes a 20 yard, and 25 to 35 squares needs a 30 yard. Two layers doubles the weight, so a two-layer 20 square roof sizes like a 40 square single layer.

How much does a square of shingle weigh?

About 250 pounds for composition shingle. Architectural shingle runs heavier, closer to 300. Ten squares is more than a ton, which is why a container that looks half empty can already be at its limit.

How much is a roofing dumpster in Concord?

From $540, with the disposal weight included. A 20 yard is $615 with 2 tons and a 30 yard is $765 with 3 tons. Past the allowance the rate is $165 per ton, prorated from the scale ticket.

Can you place it close to the roof?

Yes, tell us the drop zone when you book. The driver positions the container where the crew is throwing from, which saves carrying bundles across a lawn or a driveway. The truck still needs a straight approach to place it.

What if the roof has two layers?

Double the weight and size accordingly. A two-layer tear-off on a 20 square roof produces roughly 5 tons, which exceeds a 30 yard allowance. On those jobs we quote the overage in advance or plan a swap.

Do you take wood shake?

Yes, and it is lighter than composition. Shake fills volume faster but weighs less, so on a shake roof the container is chosen by size rather than by tonnage, which is the reverse of the usual rule.

Can other trades use the same container?

Yes, but tell us, because it changes the weight estimate. Adding drywall or framing to a roofing container is fine physically. It just means the tonnage math done from the square count no longer applies.

How fast can you deliver for a tear-off?

Same afternoon on weekday calls before 2PM. Roofing crews usually book the day before so the container is on site when the tear-off starts at first light.

Roofing Dumpster Rental in Concord, CA

Short answer: roofing containers are sized by the square, not by volume. A square of composition shingle weighs about 250 pounds, so a 25 square roof produces roughly 3 tons. Prices start at $540 with the disposal weight included, and delivery is same afternoon on weekday calls before 2PM.

Every other job we haul is a question of how much space the debris takes. Roofing is the exception. Tear-off material is dense, it is loaded quickly, and a container that looks half full is frequently at its legal limit already.

The Arithmetic That Picks the Container

250 pounds per square, doubled for a second layer. Twenty squares of single layer composition is about 2.5 tons, which exceeds a 20 yard allowance by half a ton and sits comfortably inside a 30 yard. Architectural shingle runs closer to 300 pounds a square, so the same roof in architectural material moves up a size.

Give us the square count and the number of layers and the container follows from the number. It is the one service where we can size accurately before seeing the job.

Placement Saves the Crew More Than Size Does

A container set beside the drop zone saves hours of carrying bundles. Tell us where the crew is throwing from when you book, and the driver positions it there rather than at the end of the driveway. The truck still needs roughly 60 feet of straight approach and 22 feet of overhead clearance, so overhead lines near the roofline are worth mentioning too.

Rotten Decking Adds Weight the Square Count Misses

The arithmetic above assumes shingle alone, but a tear-off that exposes rotten or water-damaged plywood decking pulls that decking out too, and wet wood is considerably heavier than the dry framing lumber the estimate expects. If the roof has visible soft spots or past leak damage, mention it when booking so the container accounts for both layers rather than shingle alone.

Where Tear-Off Debris Ends Up

Asphalt shingle is accepted at facilities that follow CalRecycle standards for construction and demolition debris, and some facilities in the region recover the asphalt itself for reuse in paving. Wood shake and shingle route differently, since untreated wood is handled as clean lumber rather than roofing waste.

Wood Shake Reverses the Rule

Shake and wood shingle weigh far less than composition but take up more space, so on those roofs the container is chosen by volume in the normal way. If the tear-off is mixed, or another trade is using the same container, say so, because the tonnage estimate from the square count stops applying.

Compare containers on the dumpster sizes page, or see the rest of what we haul on the services page. Call (925) 940-9906 with the square count.

Tearing off this week?

Give us the square count and the number of layers. The container size comes straight out of those two numbers.

Concord, CA and nine Bay Area counties. Mon to Fri, 8AM to 5PM.

Two numbers decide everything

  1. SquaresRoof area in hundreds of square feet, which sets the tonnage.
  2. LayersEach additional layer doubles the weight of the tear-off.
  3. Drop zoneWhere the crew throws from, so the container lands in the right spot.
4.9 from 54 reviewsRoofers mention the container being placed where they asked

CALL US NOW for same day delivery

(925) 940-9906